Synergic welding machine Sherman DIGIMIG 200 MTM, 200A, 230V

Synergic welding machine DIGIMIG 200 MTM – a device designed for manual welding of steel and non-ferrous metals using MIG/MAG, MMA and TIG HF methods. The unit is intended for professionals who value high quality and reliability. It can also be used for soldering thin (up to 3 mm) galvanized sheets.

Digital control enables full adjustment of parameters, arc dynamics, characteristics, and manual or synergic operating mode in the MIG / MAG method. Using synergic settings greatly simplifies operation of the welder and allows it to be used by less experienced users and hobbyists.

During MMA welding, you can adjust the HOT START and ARC FORCE functions and switch off VRD.

HOT START makes arc ignition easier (MMA). The HOT START function applies a current impulse at the moment the electrode touches the workpiece, making it easier to strike the arc.

ARC FORCE - maintaining a stable welding arc (MMA). The ARC FORCE function is needed to prevent the electrode from “sticking” and to increase arc stability – at the moment a droplet of electrode metal detaches, the current automatically increases to the optimal value, which helps avoid electrode sticking during welding or cutting. The system is important when working with critical structures and when using electrodes with basic, acidic, ilmenite, rutile, and cellulose coatings.

VRD - reducing no-load voltage to a safe level to provide protection against electric shock (MMA). This function meets regional guidelines and safety standard requirements worldwide.

The welding machine allows several operating modes, including spot welding. The device has last-setting memory, i.e., after switching it off and back on, the last set parameters are restored. It is also possible to store 10 sets of settings.

The MIG/MAG welding machine is available in different комплектаcijas, before purchasing, please choose the appropriate one:

EASY:

• Welding machine
• MIG torch
• TIG torch with ionization ignition
• Ground cable
• Electrode holder
• MIX cylinder (Argon/CO2) full   x1
• Argon/CO2 regulator Sherman MOUSE 21,8 x1
• Welding wire BMW 5KG 0.8mm x1
• Aerosol WYR0010 x1

PRO:

• Welding machine
• MIG torch
• TIG torch with ionization ignition
• Ground cable
• Electrode holder
• MIX cylinder (Argon/CO2) full   x1
• Argon/CO2 regulator Sherman MOUSE 21,8 x1
• Welding wire BMW 5KG 0.8mm x1
• Welding helmet Xenoptic ION x1
• Welding gloves x1
• Aerosol WYR0010 x1
• Copper contact tips 0.8mm x4
• Nozzle TW-15 x2

ADVANCED:

• Welding machine
• MIG torch
• TIG torch with ionization ignition
• Ground cable
• Electrode holder
• MIX cylinder (Argon/CO2) full   x1
• Argon/CO2 regulator Sherman MOUSE 21,8 x1
• Welding wire BMW 5KG 0.8mm x1
• Welding helmet ESAB SAVAGE A40 or Xenoptic Vector (optional)* x1
• ARGON cylinder x1
• TIG LIFT torch with flexible neck x1
• Tungsten electrode WL20 2.4mm x1
• Welding gloves x1
• Ceramic aerosol x1
• Quick coupling for gas x1
• Gas hose x3m
• Copper contact tips 0.8mm x4
• Nozzle TW-15 x2

---
* MasterCity.lt manager will contact you regarding your preferred helmet choice