DIGIMIG 200 Pulse Synergic inverter welder
DIGIMIG 200 Pulse Synergic inverter welder
Code: 7812202_basic-
Input
~1× 230V ± 10% 50 / 60 Hz
Welding current MIG [A]
50 – 200
Duty cycle MIG [%]
30
Output working voltage MIG [V]
12,3 – 26
Wire feeding speed [m/min]
2 – 12,8
Wire feeder
builid-in, 2 - roll gear
Welding wire spool [mm]
≤ 5[kg], Ø200
Wire diameter Ø [mm]
Steel 0.6 / 0.8 / 1.0
Aluminium 1.02T/4T switch
Yes
Inductance control
Yes
Wire test
Yes
Synergy
Yes
Manual correction to synergy
Yes
MIG/MAG polarization change
Yes
Manual welding mode
Yes
TIG welding
Yes
Welding current TIG [A]
10 – 200
Duty cycle TIG [%]
30
MMA welding
Yes
Welding current MMA [A]
10 – 180
Hot Start
Yes
Arc Force
Yes
VRD
Yes
Duty cycle MMA [%]
60
Max. current consumpiton [A]
MIG: 40 / MMA: 38
Power factor (cosφ)
0,76
Insulation class
H
Protection class
IP21S
Weight [kg]
12
Dimensions [mm]
490 × 230 × 330
Network security (fuse) [A]
25c
The synergic DIGIMIG 200 Pulse welder is an innovative device for manual welding of steel and nonferrous metals using MIG / MAG, MMA (coated electrode) and Lift TIG methods. The device is addressed to professionals who value high quality and reliability. It can also be used for braze welding of thin (up to 3 mm) galvanized sheets. The welder enables connection of a Spool Gun (SG).
Digital control allows full adjustment of parameters, arc dynamics, characteristics and manual or synergic mode of operation in the MIG / MAG method. The use of synergic settings in the welder for ordinary steel, stainless steel and aluminum alloys significantly simplifies its operation and allows it to be used by people with less experience and hobbyists. The use of pulse or double pulse allows for better weld quality, high aesthetics and very high performance.
The device can be welded using the standard MMA or MMA method with pulsation, which allows for higher quality welds. In MMA you can adjust ARC FORCE, HOT START and turn off VRD.
DIGIMIG 200 Pulse enables TIG welding with DC pulsation together with pulse characteristics adjustment. The welder allows the use of several modes of operation including the option of spot welding. The device has the memory of the last setting, i.e. after turning it off and on again, the last set parameters are restored. It is also possible to save 35 sets of settings with easy access to the program recording / playback mode. On the inside of the spool chamber cover there is a quick guide for the welder that facilitates the current operation of the device with a detailed description of access to adjustable operating parameters.
The welder is equipped with a unique MIG torch with a knob on the handle enabling remote adjustment of welding voltage / current when working in synergic mode.
The set also includes a ground wire, electrode cable and aluminum welding roller. -
Synergic inverter Spartus MasterMIG 250PFC SYNERGY welder, 250A, 230VCode: MasterMIG250PFCsynergy1603 € - 1858 € VAT incl.MIG/MAG SPARTUS® MasterMIG 250 DUAL Pulse Synergy welderCode: MasterMIG250dualPulseSynergy1800 € VAT incl.
2220 €You save 420 €MIG/MAG SPARTUS® EasyMIG 210S inverter welderCode: EasyMIG210S_basic338 € VAT incl.408.62 €You save 70.62 €MIG/MAG SPARTUS® MasterMIG 250W DUAL PULSE SYNERGY welderCode: MasterMIG250WdualPulseSynergy2925 € - 3190 € VAT incl.