Synergic welding machine Sherman DIGIMIG 200 MTM, 200A, 230V

The synergic welding machine DIGIMIG 200 MTM is a device designed for manual welding of steel and non-ferrous metals using MIG/MAG, MMA, and TIG HF methods. It is intended for professionals who value high quality and reliability. It can also be used for brazing thin (up to 3 mm) galvanized sheets.

Digital control allows full adjustment of parameters, arc dynamics, characteristics, and manual or synergic working mode using the MIG / MAG method. The use of synergic settings greatly simplifies the operation of the welding machine and makes it accessible to less experienced operators and hobbyists.

During MMA welding, you can adjust the HOT START, ARC FORCE functions and turn off VRD.

HOT START facilitates arc ignition (MMA). The HOT START function generates a current impulse at the moment the electrode contacts the workpiece, easing the ignition of the arc.

ARC FORCE - maintaining the stable welding arc (MMA). The ARC FORCE function is required to prevent the electrode from "sticking" and to increase the stability of the arc burning – at the moment when the electrode's metal drop detaches, the current automatically increases to the optimal value, which prevents the electrode from sticking during welding or cutting. This system is important when working with critical structures and using electrodes with basic, acid, ilmenite, rutile, and cellulose coatings.

VRD - reducing the no-load voltage to a safe level to ensure protection from electric shock (MMA). This function meets global regional directives and safety standards requirements.

The welding machine allows the use of several working modes, including spot welding. The device has a memory of the last setting, i.e., when it is turned off and then switched on again, the last set parameters are restored. It is also possible to remember 10 settings sets.

Package includes:

• Welding machine
• MIG torch
• TIG torch with HF ignition
• Ground cable
• Electrode holder