Set - synergic welding machine Sherman DIGIMIG 205 LCD SYNERGIC, 200A, 230V

The DIGIMIG 205 LCD SYNERGIC synergic welding machine is used for manual welding of steel and non-ferrous metals. It can also be used to braze thin (up to 3 mm) galvanized sheets. The unit allows welding using MMA, TIG Lift and MIG methods. The MIG method can be used in manual mode as well as using synergic programs. Using carbon steel and aluminum synergy settings in the device greatly simplifies operation and allows it to be used by less experienced users and hobbyists. Polarity change is possible. Digital control allows full adjustment of parameters, arc dynamics and characteristics.

The unit has last-setting memory, i.e., after switching it off and on again, the last set parameters are restored. The Fan Stop function turns off the fan at low load of the welding machine, significantly reducing noise levels.

During MMA welding, you can adjust the HOT START and ARC FORCE functions and disable VRD:

• HOT START - makes arc ignition easier. This function applies a current pulse at the moment the electrode touches the workpiece, making arc ignition easier.
• ARC FORCE - maintaining a stable welding arc. This function is necessary to prevent the electrode from “sticking” and to increase arc stability – at the moment a drop of electrode metal detaches, the current automatically increases to the optimal value, which helps avoid electrode sticking during welding or cutting. The system is important when working with critical structures and using electrodes with basic, acidic, ilmenite, rutile and cellulose coatings.
• VRD - reduction of open-circuit voltage to a safe level to provide protection against electric shock. This function complies with regional guidelines and safety standard requirements worldwide.

The MIG/MAG welder is available in different configurations; before purchasing, choose the right one:

EASY:

• Welding machine
• Welding torch TW-15/3m
• Electrode holder
• Ground cable
• MIX cylinder (Argon/CO2) full x1
• Argon/CO2 regulator Sherman MOUSE 21,8 x1
• Welding wire BMW 5KG 0.8mm x1
• Aerosol WYR0010 x1

PRO:

• Welding machine
• Welding torch TW-15/3m
• Electrode holder
• Ground cable
• MIX cylinder (Argon/CO2) full x1
• Argon/CO2 regulator Sherman MOUSE 21,8 x1
• Welding wire BMW 5KG 0.8mm x1
• Welding helmet Xenoptic ION x1
• Welding gloves x1
• Aerosol WYR0010 x1
• Copper tips 0.8mm x4
• Nozzle TW-15 x2

ADVANCED:

• Welding machine
• Welding torch TW-15/3m
• Electrode holder
• Ground cable
• MIX cylinder (Argon/CO2) full x1
• Argon/CO2 regulator Sherman MOUSE 21,8 x1
• Welding wire BMW 5KG 0.8mm x1
• Welding helmet ESAB SAVAGE A40 or Xenoptic Vector (optional)* x1
• ARGON cylinder x1
• TIG LIFT torch with flexible neck x1
• Tungsten electrode WL20 2.4mm x1
• Welding gloves x1
• Ceramic aerosol x1
• Quick gas connector x1
• Gas hose x3m
• Copper tips 0.8mm x4
• Nozzle TW-15 x2

---
* regarding the selection of the desired helmet, a MasterCity.lt manager will contact you