Powermat PM-IMGT-200L welding semi-automatic, 200A, 230V

The Powermat PM-IMGT-220L welding machine is perfectly suited for use both in home workshops and on the farm, as well as for more professional work such as outdoor jobs and all kinds of repair work inside buildings. It is a widely usable device designed for MIG/MAG, FCAW, MMA and TIG Lift welding (the TIG Lift torch is not included in the basic set). The semi-automatic welder is made using IGBT transistor technology; its welding current is very stable, ensuring excellent welding results. Thanks to IGBT technology, the device is lightweight and compact.

The adjustment of welding parameters is smooth; the maximum welding current depends on the thickness of the wire or electrode used, the welding voltage, and, in the case of the MIG / MAG / FCAW method, also on the wire feed speed. The two-roller feeder works with wire of 0,8 / 0,9 / 1,0 mm diameter. The high efficiency of the semi-automatic welder allows welding with 200A current (MIG / MAG / FCAW / TIG / MMA) at a 60% duty cycle. If the permissible duty cycle for a given welding current is exceeded, the thermal switch will shut the device off, preventing the welder from overheating. The current device parameters during welding are shown on an easy-to-read display. Convenient knobs allow you to change welding parameters even while wearing gloves.

The welding semi-automatic is available in different комплектации; before purchasing, choose the suitable one:

EASY:

• Welding machine
• Ground cable (-), 2 m
• MMA electrode holder (+), 2 m
• EURO MIG/MAG holder, 2 m
• Tips 0,8 / 0,9 / 1,0 mm
• Flux wire 0,8 mm / 0,45 kg
• Welding visor (mask)
• Hammer with brush
• MIX cylinder (Argon/CO2) full   x1
• Argon/CO2 regulator Sherman MOUSE 21,8 x1
• Welding wire BMW 5KG 0.8mm x1
• Aerosol WYR0010 x1

PRO:

• Welding machine
• Ground cable (-), 2 m
• MMA electrode holder (+), 2 m
• EURO MIG/MAG holder, 2 m
• Tips 0,8 / 0,9 / 1,0 mm
• Flux wire 0,8 mm / 0,45 kg
• Welding visor (mask)
• Hammer with brush
• MIX cylinder (Argon/CO2) full   x1
• Argon/CO2 regulator Sherman MOUSE 21,8 x1
• Welding wire BMW 5KG 0.8mm x1
• Welding helmet Xenoptic ION x1
• Welding gloves x1
• Aerosol WYR0010 x1
• Copper tips 0.8mm x4
• Nozzle TW-15 x2

ADVANCED:

• Welding machine
• Ground cable (-), 2 m
• MMA electrode holder (+), 2 m
• EURO MIG/MAG holder, 2 m
• Tips 0,8 / 0,9 / 1,0 mm
• Flux wire 0,8 mm / 0,45 kg
• Welding visor (mask)
• Hammer with brush
• MIX cylinder (Argon/CO2) full   x1
• Argon/CO2 regulator Sherman MOUSE 21,8 x1
• Welding wire BMW 5KG 0.8mm x1
• Welding helmet ESAB SAVAGE A40 or Xenoptic Vector (optional)* x1
• ARGON cylinder x1
• TIG LIFT torch with flexible neck x1
• Tungsten electrode WL20 2.4mm x1
• Welding gloves x1
• Ceramic aerosol x1
• Quick gas connector x1
• Gas hose x3m
• Copper tips 0.8mm x4
• Nozzle TW-15 x2

---
* MasterCity.lt manager will contact you regarding the selection of the desired helmet