MOST kit - Fanmig J5 LCD inverter welding MIG/MAG machine, 200A, 230V

MOST FANMIG J5 LCD is a modern semi-automatic welding machine designed for MIG/MAG, MMA or TIG DC (LiftArc) welding. The unit can be used for welding steel or stainless steel in a shielding gas environment. Main application areas: trades, car body repair, hobby use, renovation, etc. The unit is powered from a single-phase 230 V mains supply.

The front panel features an LCD display. Parameter values are set using the knob; pressing it confirms the settings. There are two synergic programs for welding steel with 0.8 mm and 1.0 mm diameter wire in gas or CO2, as well as a manual MANU MIG setting. Depending on the selected wire diameter, the knob adjusts both welding current and wire feed speed. The unit can also be used with 0.8–0.9 mm diameter FLUX cored wires by changing polarity.

The wire feeder allows welding with 1 kg or 5 kg spools. Recommended steel wire diameters are 0.8 mm and 1.0 mm.

A fan and thermal sensor protect the unit against overheating. The unit is manufactured in accordance with EN 60974-1.

Advantages of the FANMIG J5 LCD MOST:

• Higher welding current than similar MIG/MAG machines powered from a 230 V network.
• Very good welding characteristics for both MAG and MMA methods.
• Ability to weld using TIG DC with LiftArc.
• LCD display.
• Euro socket for connecting any MIG/MAG torch.
• Standard earth socket (35/50).
• Low weight – only 9.9 kg.
• Quiet fan.
• Ability to choose one of four languages.
• Clearly presented welding parameters and functions.

The LCD control panel displays all main functions of the unit:

• Selection of welding method.
• Selection of synergic MIG/MAG programs.
• Selection of electrode diameter for MMA and TIG DC methods.
• Inductance setting for the Manu MIG method.
• VRD function on/off.
• Many additional functions.

The welding MIG/MAG machine has different kit configurations; before purchasing, choose the suitable one:

EASY:

• Most Fanmig J5 LCD welding MIG/MAG machine
• Earth cable
• MMA electrode holder
• Gas hose
• MIX cylinder (Argon/CO2) full x1
• Argon/CO2 regulator Sherman MOUSE 21,8 x1
• BMW welding wire 5KG 0.8mm x1
• Aerosol WYR0010 x1

PRO:

• Most Fanmig J5 LCD welding MIG/MAG machine
• Earth cable
• MMA electrode holder
• Gas hose
• MIX cylinder (Argon/CO2) full x1
• Argon/CO2 regulator Sherman MOUSE 21,8 x1
• BMW welding wire 5KG 0.8mm x1
• Welding helmet Xenoptic ION x1
• Welding gloves x1
• Aerosol WYR0010 x1
• Copper tips 0.8mm x4
• Nozzle TW-15 x2

ADVANCED:

• Most Fanmig J5 LCD welding MIG/MAG machine
• Earth cable
• MMA electrode holder
• Gas hose
• MIX cylinder (Argon/CO2) full x1
• Argon/CO2 regulator Sherman MOUSE 21,8 x1
• BMW welding wire 5KG 0.8mm x1
• Welding helmet ESAB SAVAGE A40 or Xenoptic Vector (optional)* x1
• ARGON cylinder x1
• TIG LIFT torch with flexible neck x1
• Tungsten electrode WL20 2.4mm x1
• Welding gloves x1
• Ceramic aerosol x1
• Quick gas connector x1
• Gas hose x3m
• Copper tips 0.8mm x4
• Nozzle TW-15 x2

For purchasing a torch, please contact MasterCity.lt consultants.

---
* regarding the desired helmet selection, a MasterCity.lt manager will contact you