Synergic inverter DIGIMIG 225GDS welding machine
Synergic inverter DIGIMIG 225GDS welding machine
Code: SDIGITECMIG225GDS-
Supply voltage [V]
AC 230 50Hz
Welding methods
MIG, MMA, Lift TIG, braze welding
Production technology
IGBT
Welding current [A]
MIG: 220 MMA: 210 TIG: 210
Duty cycle [%]
thirty
Max. current consumption [A]
38 (MIG) / 42 (MMA) / 27 (TIG)
Max. power consumption [kVA]
5.9
Welding current adjustment
Liquid
Avg. spool with wire [mm]
100, 200
Rev.. wire feed [m / min]
2 - 14
Weight [kg]
13
Dimensions (L x W x H) [mm]
450 x 218 x 370
Functions
Arc Force, 2T / 4T, VRD, TIG Lift, Inductance adjustment, Welding without gas, 2-roll feeder, Spool Gun option, Memory settings, TIG Lift
Supply voltage [V]
AC 230 50Hz
Welding methods
MIG, MMA, Lift TIG, braze welding
Production technology
IGBT
Welding current [A]
MIG: 220 MMA: 210 TIG: 210
Duty cycle [%]
30
Max. current consumption [A]
38 (MIG) / 42 (MMA) / 27 (TIG)
Max. power consumption [kVA]
5.9
Welding current adjustment
Liquid
Avg. spool with wire [mm]
100, 200
Rev.. wire feed [m / min]
2 - 14
Weight [kg]
13
Dimensions (L x W x H) [mm]
450 x 218 x 370
Functions
Arc Force, 2T / 4T, VRD, TIG Lift, Inductance adjustment, Welding without gas, 2-roll feeder, Spool Gun option, Memory settings, TIG Lift
The synergistic DIGIMIG 225GDS welder is the most innovative device on the Polish market for manual welding of steel and non-ferrous metals using the MIG / MAG, MMA (coated electrode) and Lift TIG methods. The device is aimed at professionals who value high quality and reliability. It can also be used for braze welding of thin (up to 3 mm) galvanized sheets. Due to the change of polarity, the device allows MIG / MAG welding with the use of both standard wires in a protective gas shield and self-shielded flux-cored wires.
The welder allows you to connect a Spool Gun (SG) with a mini wire feeder mounted in it and a D100 steel or colored wire spool, so you can weld with two different wires without having to change the device.
Digital control allows for full adjustment of parameters, arc dynamics, characteristics and manual or synergic operating mode in the MIG / MAG method. The use of synergic settings in the welder for ordinary and stainless steel as well as AlMg5 and AlSi5 aluminum alloys significantly simplifies its operation and allows it to be used by people with less experience and hobbyists.
In MMA mode, you can adjust ARC FORCE, HOT START and turn off VRD.
The device has the memory of the last setting, i.e. after turning it off and on again, the last set parameters are restored and the ability to save 40 sets of settings (10 for each welding method + 10 for manual MIG / MAG settings) with a separate program number display.
On the inside of the spool chamber cover there is a shortened guide for the welder, which facilitates the current operation of the device. -
MIG/MAG SPARTUS® MasterMIG 250W DUAL PULSE SYNERGY welderCode: MasterMIG250WdualPulseSynergy2925 € - 3190 € VAT incl.Synergic inverter Spartus MasterMIG 250PFC SYNERGY welder, 250A, 230VCode: MasterMIG250PFCsynergy1603 € - 1858 € VAT incl.