ADA ROTARY 400 HV-G Servo Rotary Laser Level, Green

The ADA ROTARY 400 HV-G Servo laser level is a construction rotary level with a bright green beam, featuring electronic compensators on servo drives. The servo drives ensure ± 0.15 mm / m accuracy and a slope compensation range up to ± 5°.

The green laser beam - is the uniqueness of this rotary level. The green beam is significantly more visible than red under the same conditions.

Automatic leveling. Leveling in the vertical or horizontal plane is performed automatically using servo drives based on tilt sensors. When accidentally hit, the device stops operating, performs leveling, and continues its work.

Manual slope angle selection. The device's tilt angle adjustment function in the X and Y planes up to 5° allows planning slopes in the horizontal plane in all directions.

Laser rotation speed selection. The rotation speed of the laser emitter can be adjusted from 0 to 600 rpm. The higher the speed, the more frequently the laser point passes a long distance from the level through the leveling rod or receiver. For work without a receiver, a lower speed is more convenient.

Scanning mode is intended for work in a specific sector. The sector changes from a point to 180°. This function is necessary if the laser beam is needed only in a particular place or when several devices operate on the construction site at the same time. The laser beam can be moved to a predetermined point using a remote control.

Working with a receiver. When working at large distances, a laser beam receiver, which is included in the set, is used. By attaching it to the leveling rod, you can take measurements up to 400 meters away.

Remote control. Working within a 20-meter range, it's convenient to use the remote control. To change the working modes, you don't need to approach the laser level.

Additional 5/8'' holder will allow you to place the ADA ROTARY 400 HV-G Servo on a tripod for vertical measurement.

The ADA ROTARY 400 HV-G Servo is perfectly suited for horizontal and vertical measurement in construction and finishing works - installing engineering communications, leveling floors and walls, installing ceilings and ventilation systems, carrying out planning works, leveling curved surfaces, performing finishing works, arranging entrances and exits with a slope, etc.

Kit includes:

• Rotary laser level
• Laser beam receiver
• Mounting for receiver
• Remote control
• Laser target
• Laser glasses
• Charger
• Plastic case

When purchasing this rotary level, you receive a laser distance meter ADA COSMO MINI 30 as a gift!