ADA ROTARY 500 HV-G Servo Green Rotary Laser Level + GIFT Laser Distance Meter ADA COSMO MINI 30

All ADA products are certified.

The ADA ROTARY 500 HV-G Servo laser level is a construction rotary level with a bright green beam, featuring electronic compensators on servo gears. The servo gears ensure ± 0.1 mm/m accuracy and a tilt compensation range up to ± 5°.

The green laser beam is the uniqueness of this rotary level. Green beam is significantly more visible than red under the same conditions.

Automatic leveling. Leveling in the vertical or horizontal plane is done automatically using servo gears based on tilt sensors. In case of an accidental impact, the device stops working, performs leveling, and resumes its operation.

Manual slope angle selection. The device's adjustment function for the X and Y plane slope angles up to 5° allows planning slopes in the horizontal plane in all directions.

Laser rotation speed selection. The rotational speed of the laser emitter is adjustable from 0 to 600 rpm. The higher the speed, the more often the laser point passes a long distance from the level through the leveling measure or receiver. For work without a receiver, it's more convenient to use a lower speed.

Scanning mode is designed to work in a specific sector. This function is needed if the laser beam is only required in a certain location or when several devices are operating on the construction site at the same time. The laser beam can be moved to a pre-set point.

Working with a receiver. When working at large distances, a laser beam receiver included in the set is used. Attaching it to the leveling measure, measurements up to 500 meters can be performed.

Remote control. A remote control is convenient for use within a 100 meters range. To change the operating modes, there is no need to approach the laser level. The remote control displays all the level's operating modes.

Additional 5/8'' holder allows setting up the ADA ROTARY 500 HV-G Servo on a stand for vertical measurements.

The ADA ROTARY 500 HV-G Servo is perfectly suitable for horizontal and vertical measurements for construction and finishing works - installing engineering communications, aligning floors and walls, installing ceilings and ventilation systems, carrying out planning works, aligning curved surfaces, doing finishing works, managing incline entrances and exits, and more.

Package includes:

• Rotary level
• Laser beam receiver
• Receiver mount
• Remote control
• Laser target
• Laser glasses
• Charger
• Plastic case

By purchasing this rotary level, you will receive a laser distance meter ADA COSMO MINI 30 as a gift!