ADA 3D LINER 2V GREEN Laser Level
Code: A00532Price 85.00 € VAT incl.( 70.25 € VAT excl. )211.00 €You save 126.00 €Want another price? Suggest yours!ManufacturerLine laser typeLaser level-
Working range
40 m
Working range with receiver
70 m
Accuracy
±0.2/1 mm/m
Compensator working range
±3°
Laser diode
Class 2, 552 nm, <1mW
Power source
4 AA / 1.5 V / Li-ion battery
Operating temperature range, °C
-10 to +40°C
Laser projection
1H 2V 1D (3 lines, one point)
Dust and moisture protection
IP54
Stand thread
5/8''
Weight
0.9 kg
The ADA 3D LINER 2V GREEN laser level is a precise professional laser level designed for both indoor and outdoor use. The level projects bright green lines: 2 vertical (2V), 1 horizontal (1H) and a plumb spot (D). The uniqueness of the level lies in its green laser beam. Under the same lighting conditions, the green beam is more visible than the red.
Choice of laser lines. Laser lines can be turned off depending on your needs to conserve battery level. The laser plumb allows for precise positioning of the ADA 3D LINER 2V GREEN on the required primary spot. The intersection of vertical lines on ceilings allows for the transfer of the laser plumb point (on the floor) to the ceiling with very high precision.
Operating mode with the receiver. The level's working range is 40 m, but with the laser beam receiver (not included in the package), it's possible to work at distances up to 70 m. Most importantly, the beam receiver allows work even under very bright lighting.
Micrometric screw. The ADA 3D LINER 2V GREEN laser level has a rotatable base with a degree scale of 360°, allowing for precise control over the expansion angle of the vertical beams. The direction of the vertical beam to the desired side and spot is adjusted with the micrometric screw.
Battery and charger. The level operates on a lithium-ion battery with an increased capacity of 3200 mA. The device can also work directly from the charger (included). If the battery level is zero, and you don't have batteries, you can connect the laser level directly to the power source using the charger and continue working.
Transport case. For transportation and storage of all accessories, the laser level comes with a high-quality case. The case is impact-resistant, drop-resistant and load-resistant. Inside the case, the level can be fixed to prevent movement. Each additional level element has its own specific place in the case.
Laser glasses are necessary when working in brightly lit places, where the working distance is short and the beam is barely visible. With such glasses, the beam is clearly visible on any surface.
Package includes:
- Laser level
- Transport case
- Laser glasses
- Battery
- Charger
- Battery adapter
- Extension screw
- Magnetic target
-
24-month warranty applies to the tool
-
ADA ULTRALiner 360 2V Laser LevelCode: A00467Price 135.50 € VAT incl.
230.00 €You save 94.50 €ADA 6D SERVOLINER 4V4H1D Laser LevelCode: A00621Price 450.00 € VAT incl.465.00 €You save 15.00 €ADA 3D LINER 4V GREEN Laser LevelCode: A00531Price 241.00 € VAT incl.262.00 €You save 21.00 €ADA CUBE Mini GREEN Laser level with green beamCode: CUBE Mini GreenPrice 48.40 € VAT incl.ADA Cube 3D GREEN Laser Level (Professional Set)Code: A00545Price 126.00 € VAT incl.164.56 €You save 38.56 €BOSCH GLL 3-80 CG with Green Beam + Holder BM1 Laser LevelCode: 26-5631*_1Price 620.00 € VAT incl.ADA 6D SERVOLINER GREEN Laser level, green beamCode: A00622Price 500.00 € VAT incl.551.76 €You save 51.76 €












































