Avellor MGG-1600E magnetic drill press 1480W

Avellor MGG-1600E – a magnetic drill press designed for professional use. A magnet with nearly 1200 kg of holding force ensures a strong grip on steel plate, allowing precise drilling in horizontal or vertical positions. 

The drill has a 1480 W motor with adjustable speed from 100 to 650 rpm and a 160 mm working stroke, providing maximum control when working on steel structures, metal workpieces and installation jobs.

Key benefits:

• 1480 W motor power
• Chuck accepts up to 16 mm
• Adjustable speed – 100–650 rpm
• Reverse function
• Suitable for drilling and tapping
• 11 500 N magnetic base holding force
• 160 mm working stroke
• Motor protection
• Constant power maintenance
• Suitable for horizontal and vertical drilling
• 24-month warranty for private individuals
• 12-month warranty for professional and commercial use

Secure attachment to metal surfaces

The magnetic base holds the drill press against a steel workpiece with a force of up to 11500 N. This helps keep the tool in position for precise drilling control.

A safety strap must be used when working vertically or overhead. For maximum magnetic holding force, a clean, flat steel surface at least 10 mm thick is recommended.

Adjustable speed for different tasks

The 100–650 rpm speed range lets you adapt the drill press to different annular cutter and drill bit diameters. Lower speeds are used for harder materials, larger-diameter drill bits/annular cutters and tapping, while higher speeds suit softer materials and smaller-diameter drill bits/annular cutters.

The reverse function expands the tool's range of applications. Overload protection helps safeguard the motor if the operator applies excessive feed force or the drill bit jams in the workpiece.

Where is the „Avellor MGG-1600E“ drill press used?

Steel structure fabrication

The magnetic drill press is suitable for drilling holes in beams, profiles, plates and other structural steel components. Its portable design allows convenient attachment to the workpiece, eliminating the need to transport large components to a stationary drill press.

Installation and repair work

The MGG-1600E can be used where the size or position of a workpiece makes a handheld drill impractical. The magnetic base reduces the need for the operator to hold the tool continuously and helps maintain the drilling direction more accurately.

Metalworking workshops

The model is designed for everyday metal drilling, tapping and countersinking tasks. With a suitable holder and an accessory designed for the specific operation, it can be used with twist drill bits, taps and countersinking bits.

Safe use of the magnetic drill press

Before starting work, clean the steel surface and check the magnet's grip. Always use a suitable cutting or cooling fluid when drilling. Do not use water alone, as it can cause spindle corrosion and damage the machine's electrical components.