ADA 3D LINER 4V GREEN Laser Level
Code: A00531Price 241.00 € VAT incl.( 199.17 € VAT excl. )262.00 €You save 21.00 €Want another price? Suggest yours!ManufacturerLine laser typeLaser level-
Working range
40 m
Working range with receiver
70 m
Accuracy
±0.2/1 mm/m
Compensator working range
±3°
Laser diode
Class 2, 552 nm, <1mW
Power source
4 AA / 1.5 V / Li-ion battery
Operating temperature range, °C
-10 to +40°C
Laser projection
5 lines, one point
Protection from dust and moisture
IP54
Stand thread
5/8''
Weight
0.9 kg
The ADA 3D LINER 4V GREEN laser level is a precise professional laser level designed for both indoor and outdoor conditions. The level projects bright green lines: 4 vertical (4V), 1 horizontal (1H), and a plumb point. The uniqueness of the leveler is the green laser beam, which is much more visible under the same lighting conditions as compared to red.
Choice of laser lines. Laser lines can be switched off depending on your needs and to save battery charge level. The laser plummet allows for the precise positioning of the ADA 3D LINER 4V GREEN on the required initial point. The intersection of vertical lines on the ceiling gives the possibility to transfer the laser plumb point (located on the floor) onto the ceiling with very high accuracy.
Working mode with receiver. The working range of the level is 40 m, but with a laser beam receiver (not included in the set), you can work up to 70 m distance. However, the most important thing is that the beam receiver allows working even in very bright lighting.
Micrometer screw. The ADA 3D LINER 4V GREEN has a rotating base with a degree scale of 360°, which allows for precise control of the vertical beams' spread angle. The direction of the vertical beam to the required side and point is done with the help of a micrometer screw.
Battery and charger. The level operates on a lithium-ion battery with increased capacity – 3200 mA. The device can also work directly from the charger (included in the set). If the battery charge level is zero, and you do not have batteries, you can connect the laser level directly to the power source with the charger and continue working.
Transport case. For transportation and storing of all accessories, the laser level comes with a high-quality case. The case is resistant to shocks, falls, and load. Inside the case, the level can be fixed so it does not move. Each additional level element has its own special place in the case.
Laser glasses are necessary when you have to work in brightly lit areas, where the working distance is small, and the beam is barely visible. With such glasses, the beam is perfectly visible on any surfaces.
Set includes:
- Laser level
- Transport case
- Laser glasses
- Battery
- Charger
- Battery adapter
- Extension rod
- Magnetic target
-
24-month warranty applies to the tool
-
ADA 6D SERVOLINER GREEN Laser level, green beamCode: A00622Price 500.00 € VAT incl.
551.76 €You save 51.76 €ADA CUBE 360 GREEN Ultimate Edition Laser LevelCode: A00470Price 223.00 € VAT incl.330.00 €You save 107.00 €ADA 6D SERVOLINER 4V4H1D Laser LevelCode: A00621Price 450.00 € VAT incl.465.00 €You save 15.00 €ADA 3D LINER 2V GREEN Laser LevelCode: A00532Price 85.00 € VAT incl.211.00 €You save 126.00 €ADA CUBE 2-360 GREEN Ultimate Edition Laser LevelCode: A00471Price 276.00 € VAT incl.430.00 €You save 154.00 €ADA ULTRALiner 360 2V Laser LevelCode: A00467Price 135.50 € VAT incl.230.00 €You save 94.50 €BOSCH GLL 3-80 CG with Green Beam + Holder BM1 Laser LevelCode: 26-5631*_1Price 620.00 € VAT incl.










































