
ADA ZSM 130+ Sound Level Meter
Code: ZSM 130+Manufacturer-
The ZSM 130+ Sound Level Meter is intended for occupational safety, health protection, industrial safety, and sound quality control under various conditions. The sound level meter has an LCD screen that displays the received data.
The device allows to:
- measure noise levels in the range of 35 dB - 130 dB, in the frequency range of 31.5 Hz – 8 kHz
- measure sound pressure level, calculated according to A/C frequency weighting
- perform temporal weighting (fast 125 msec., slow 1 sec.)
- transfer data to recorders
- capture maximum measured value
- store measured value.
Frequency range
31.5 Hz — 8 kHz
Measureable sound level range
35-130 dB
Calculation according to
A/C
Microphone
½ inch electret condenser microphone
Calibration
Calibration with internal radiator (harmonic wave 1 kHz)
Display
LCD Display
Digital display
4 digits
Resolution
0.1 dB
Data display
0.5 sec
Temporal weighting
FAST (125 sec.). SLOW (1 sec.)
Sound level ranges
Lower: 35-100 dB
Upper: 65-130 dBMeasurement accuracy
1.5 dB (under set conditions)
Dynamic range
65 dB
Emergency alarm
Displays “Over” if input signal exceeds range limits
Maximum hold
Holds the maximum value with a drift < 1 dB/3 min.
AC output signal
0.65Vrms at scale limit;
output impedance — 600 ohmsDC output signal
10 mV/dB; output impedance — 600 ohms
Automatic shutdown
Automatically turns off after 15 min. of inactivity
Power supply
9V (Krona type)
Battery life
~ 50 hrs (alkaline battery)
Operating temperature
0...+40°C
Operating humidity
10-90%
Storage temperature
-10...+60°C
Storage humidity
10-75% relative humidity
Dimensions
245×64×31 mm
Weight
255
Package includes
- Sound Level Meter ZSM 130+
- 9 V battery
- transportation bag
-
12-month warranty for the device
-



