Most Fanmig J5 LCD Semi-Automatic Inverter Welding Machine, 200A, 230V, Mini Factory Kit

MOST FANMIG J5 LCD is a modern semi-automatic welding machine, suitable for MIG/MAG, MMA, or TIG DC (LiftArc) welding. The device can be used for welding steel or stainless steel in a protective gas environment. Main applications: crafts, car body repair, hobbies, renovation, etc. The device is powered by single-phase 230 V electrical network.

On the front panel, there is an LCD screen. Parameter values are set using a knob, which is pressed to confirm settings. There are two synergic programs for welding steel with 0.8 mm and 1.0 mm diameter wires in gas or CO2 environment, as well as a manual MANU MIG setting. Depending on the chosen wire diameter, the knob adjusts both the welding current and the wire feed speed. The device can also be used with 0.8–0.9 mm diameter FLUX cored wires, changing polarity.

The wire feed device allows welding with 1 kg or 5 kg reels. Recommended steel wire diameters are 0.8 mm and 1.0 mm.

The device is protected from overheating by a fan and thermal sensor. The device is manufactured according to EN 60974-1 standard.

Advantages of MOST FANMIG J5 LCD:

• Higher welding current than similar semi-automatic machines powered from the 230 V network.
• Very good welding properties both in MAG and MMA methods.
• Ability to weld using TIG DC method with LiftArc.
• LCD screen.
• Euro socket for connecting any MIG/MAG torch.
• Standard grounding socket (35/50).
• Low weight – only 9.9 kg.
• Quiet fan.
• Ability to choose from four languages.
• Clearly presented welding parameters and functions.

The LCD control panel displays all the main functions of the device:

• Selection of the welding method.
• Selection of synergic MIG/MAG programs.
• Selection of electrode diameter for MMA and TIG DC methods.
• Setting of inductance for Manu MIG method.
• Switching VRD function on/off.
• Many additional functions.